Architectural Awards Program Highlights Top Copper Projects From This Year and the Past Decade

April 26, 2017

FOR IMMEDIATE RELEASE

The North American Copper in Architecture Awards Program Celebrates 10 Years Recognizing Excellence in the Use of Copper in Building Design Projects

NEW YORK, NY— It is impossible to miss the stunning Staten Island Courthouse that stands resolutely overlooking the New York harbor. The building’s four copper-clad towers catch the morning light, acting as a beacon for those arriving by ferry. The facility’s contemporary use of copper earned it a spot among the top 15 magnificent building projects receiving a 2017 North American Copper in Architecture Award (NACIA).

The NACIA program recognizes and promotes North American building projects for their outstanding use of architectural copper and copper alloys. Now in its 10th year, the annual awards program showcases a wide range of projects, all of which highlight craftsmanship, attention to detail and architectural vision.

"The outstanding quality and ingenuity of the copper projects submitted over the past ten years is truly inspiring," said Stephen Knapp, the Director of the Sheet, Strip, & Plate Council for the Copper Development Association (CDA).  "Not only is copper known for its sustainability and durability, its innate beauty continues to make it an appealing building material. Every year I am amazed by the innovative ways copper is being applied."

Four years after receiving its first NACIA award, the University of Arizona is being honored again for its impressive construction of the Biomedical Sciences Partnership Building on the Phoenix Biomedical Campus.The 10-story building’s unique texture is achieved by manipulating 90-95 percent recycled copper into perforated panels. Copper was selected for this project for its longevity and ability to protect against direct sun exposure, which reduces the buildings energy costs and contributes to its natural facade.

Five Canadian building projects were 2017 NACIA award recipients. The house at 166 Dovercourt Road features darkly glowing, weathered copper that displays the buildings nuanced design, while tastefully allowing it to blend with the notable Toronto neighborhood comprised of old Victorian houses. In addition, the renovation to the Saskatchewan Legislative Dome, which involved 28,000 pounds of copper, was also among the winners. Copper’s innate strength and attractive appearance made it the obvious material of choice for both projects.

Established in 2008, the NACIA awards program is sponsored by industry representatives at CDA and the Canadian Copper & Brass Development Association (CCBDA). Projects are selected across three different categories: New Construction, Renovation/Restoration and Ornamental Applications.  This year’s recipients include:

New Construction

166 Dovercourt House – Toronto, Ontario, Canada
Application: Wall Cladding
Architect: Ja Architecture Studio
Builder/Developer: Luloo Boutique Homes
General Contractor: Mazifa Corp Copper
Wall Panel Manufacturer: Copper in Design

Biomedical Sciences Partnership Building
on the Phoenix Biomedical Campus – Phoenix, Arizona
Application: Roofing, Exterior Cladding
Architect: CO Architects
Sheet Metal Contractor: Kovach Building Enclosures

Wet Weather Pump Station – Hoboken, New Jersey
Application: Wall Cladding
Architect/Builder: Nastasi Architects

Private Residence – Juneau, Alaska
Application:  Roofing, Exterior Ornamental
Sheet Metal Contractor: Fine Metal Roof Tech

210 Pacific Street – Brooklyn, New York
Application: Wall Cladding
Builder/Developer: NAVA
Sheet Metal Contractor: Fine Metal Roof Tech

Private Residence – Gurley, Alabama
Application:  Roofing, Exterior Ornamental
Architect: Nola | VanPeursem Architects, PC Huntsville, Alabama
Sheet Metal Contractor: CopperWorks Corporation Decatur, Alabama

Staten Island Courthouse, St. George – Staten Island, New York
Application: Wall Cladding
Architect: Ennead Architects
Curtainwall Consultant: Heintges & Associates

Restoration

31 East 74th St. – New York, New York
Application: Wall Cladding, Exterior Ornamental
Architect: Beyer Blinder Belle Architects & Planners LLP
Sheet Metal Manufacturer: B&B Sheet Metal Inc.
Sub-Contractor: Apple Restoration & Waterproofing, Inc.

Centre Block of the Canadian Parliament – Ottawa, Ontario, Canada
Application:  Roofing, Exterior Ornamental
Architect: Architecture EVOQ inc.
Sheet Metal Contractor: Heather & Little Limited

Le Windsor-Mansard
Rehabilitation Project – Montreal, Quebec
Application:  Roofing, Exterior Ornamental
Architect: DMA Architectes s.e.n.c.r.l.
Sheet Metal Contractor: Toitures Trois Étoiles Inc.

Vedanta Temple – San Francisco, California
Application:  Roofing, Exterior Ornamental
Sheet Metal Contractor: Hans Liebscher Custom Copperworks

Boston Private Residence – Alexandria, Virginia
Application: Roofing
Consulting Architect: Restoration Engineering, Inc.
Sheet Metal Contractor: Wagner Roofing Company

Historic Fayette County Courthouse – Lexington, Kentucky
Application:  Roofing, Exterior Ornamental
Architect: K. Norman Berry Associates Architects, PLLC
Sheet Metal Contractor: Steinrock Roofing & Sheet Metal, Inc.

Saskatchewan Legislative Building Dome Conservation – Regina, Saskatchewan, Canada
Application:  Dome Restoration
Conservation Architect: Spencer R. Higgins, Architect Incorporated
Sheet Metal Contractor: Empire Restoration Inc.
Construction Managers: PCL Construction Management Inc.

Ornamental

The Wellington Building Renovation Project – Toronto, Ontario, Canada
Application:  Roofing; Interior Ornamental
Architect: NORR Limited Architects, Engineers & Planners
Roofing Contractor: Raymond and Associates Roofing Inc.

To commemorate the 10th anniversary of the NACIA Awards, the copper, architectural and construction industries, and the general public selected 10 top projects from the last decade, which feature a mix of historic and modern buildings using copper. Among the award-winning copper projects were two museums, a medical facility, two city hall buildings and an academic library. The 10th anniversary award winners include:

NACIA Tenth Anniversary Winners

  • Canadian National War Museum
  • Filene Center at Wolf Trap National Park for the Performing Arts
  • Health Sciences Education Building on the Phoenix Biomedical Campus
  • Milwaukee City Hall
  • Natural History Museum of Utah
  • Currie & Mackenzie Buildings, RMC
  • Harvard University Tozzer Library
  • Kansas Statehouse Copper Dome & Roof Replacement
  • Montreal City Hall
  • Private Residence

The NACIA building projects were judged by a panel of architectural and copper industry experts. Entries were evaluated based upon overall building design, integration of copper, craft of copper installation and excellence in innovation or historic restoration.

CDA hosted an awards ceremony in Orlando on April 27. To view each project, including photos and profiles, visit our 2017 NACIA section.

###

The Copper Development Association is the information, education, market and technical development arm of the copper, brass and bronze industries in the USA.

Learn more at our Blog thinkcopper.org.

Follow us on Twitter at twitter.com/thinkcopper.