Four Decades of Innovation: Issues 26 - 60
No. 26 - 1975
Protecting Lives in Highrises
Little Tokyo Towers is the first high rise built in Los Angeles under new state and city fire codes, which require automatic fire sprinklers to be installed in newly constructed buildings over 75 feet tall. An all-copper "Life Safety System" protects residents of the 16-story residential tower.
No. 27 - 1976
Residential Plumbing Solutions
Challenged by a modern interior design in the house he is plumbing, a Denver contractor becomes the first to introduce a new commercial plumbing product into a singlefamily home. An open floor plan in the kitchen left few options for venting the plumbing drain out of view. The plumber used an innovative self-aerating copper pipe called Sovent, which does not require a separate vent pipe to the outdoors to keep from marring the modern interior decor.
No. 28 - 1976
Lightweight Sprinkler Systems
Citing ease-of-use over steel piping for residential sprinkler installations, the head of Acme Automatic Sprinkler, located just outside Philadelphia, chooses an all-copper sprinkler system for the 21-story residential Regency Towers condominium building in Ventnor, New Jersey. The contractor says copper systems take less than half the time for installation as steel systems.
No. 29 - 1976
Solar is Booming
Skyrocketing energy costs have consumers scrambling for alternative solutions to heat their homes and provide domestic hot water. The number of new, all-copper solar collector manufacturers also climbs - fueled by industry recognition of copper's superior performance and quality for this application.
No. 30 - 1976
Fast Food Chain Installs Sprinklers, Fast
The popularity of fast food restaurants prompts concern for diner safety. Burger King Corporation announces that its 2,000 locations would be outfitted with allcopper fire sprinklers by 1980. Director of Safety Donald Herbstman says the company chose copper because installation time is one-third faster than with other piping systems.
No. 31 - 1977
Urban Co-ops Try Solar Energy
Twenty-five turn-ofthe- century residential co-op buildings in New York City's most disadvantaged neighborhoods are slated to "go solar," thanks to assistance from a private group called the Energy Task Force. Tenants provide the work equity to install all-copper solar panels while government funding pays for the equipment.
No. 32 - 1977
Capitol Copper Construction
More than 30,000 pounds of copper are used to re-roof the Arizona State Capitol Building in Phoenix. The building's dramatic dome is covered in 6 copper that has a special clear finish, called Incracoat (developed by the International Copper Research Association), applied to its surface to ensure that its original coloring never fades.
No. 33 - 1977
Vegas Hotel Plumbing Is No Gamble
Las Vegas casino hotel construction booms with the help of a new, easier-to-install copper Sovent plumbing system. An 800-room addition to the Flamingo Hilton and the all-new Las Vegas Hilton benefit from the self-aerating plumbing system, which eliminates the need for separate vent stacks, saving time and cost of installation.
No. 34 - 1978
Trio of Building Systems
Danbury Hospital in Connecticut builds a nine-story addition that is the first known structure to incorporate three new all-copper building systems: A copper solar energy system, all-copper automatic fire sprinklers and an all-copper Sovent plumbing drain system. In addition, copper tube is used throughout for water distribution and drainage, air temperature control, clinical air for intensive care patients and snow - melting equipment.
No. 35 - 1978
Solar-Powered Fire Station
The country's first fully solar-assisted fire station is constructed in Dallas, Texas. Fire Station #1 uses 60 all-copper solar collector panels to provide 75 percent of its hot water, 50 percent of its cooling and 40 percent of its heating. To encourage residents to learn more about solar power, appointments are scheduled to allow the public to view the system.
No. 36 - 1978
Cost-Saving Plumbing Systems
Self-aerating copper Sovent plumbing drain-vent systems continue to demonstrate the installation speed and cost-saving attributes of these prefabricated products. Projects in the news range from a new 1,000-room MGM Grand Hotel in Reno to a 100-room retirement home. All benefit from an estimated 30 percent in savings over conventional drainage systems.
No. 37 - 1978
The Copper Electric Runabout is CDA's latest electric vehicle prototype designed to reduce pollution and gas consumption. With a 14-hp electric motor powered by eight leadacid batteries, it has a top speed of 59 mph, a city driving range of 79 miles (with stops), and a cruising range of 72 miles at 40 mph. Designed to sell for $5,000 and be used as a second car, it is introduced at the Fifth International Electric Vehicle Symposium.
No. 38 - 1979
Motors for Machinery
Statistics show that copper use for industrial and farm machinery and mining equipment totals 45 million pounds annually. Most of the copper is used in electric motor windings. Electric forklifts, which have up to four separate motors, consume 8.7 million pounds. Draglines for mining and construction use 2.7 million pounds - one 5,000,000-pound dragline alone requires 120,000 pounds of copper in motors and generators, 30,000 pounds in wiring and more than 4,000 pounds in bronze bearings and bushings.
No. 39 - 1979
Ode to Copper
Two Arizona hotels use copper throughout to attract guests by projecting an image of beauty and to suggest Arizona's copper mining history. The San Carlos Hotel incorporates copper-clad doors, elevator facades, ceilings and planters. The Fiesta Inn uses 15,000 square feet of copper in the building's facade, exterior and interior lamps and in walkways to guest rooms, while the inn's bar, tables, countertops and food trays are all copper-clad.
No. 40 - 1979
Solar Swimming Pools
More than 1,000 copper solar panel installations are reported to be heating swimming pools in homes across the country, and many systems coordinate pool heating with home hot water and space heating and cooling. The systems demonstrate copper's superior heat-transfer capability and long lifetime over plastic solar panels, and fewer copper panels help to reduce materials and installation costs. Consumers also realize savings more quickly, as payback on combined pool/home heating is reduced in many cases to less than two years.
No. 41 - 1979
Solar Apprentice Program
More than 10 million pounds of new copper will be needed to supply 75% of the expected 115,000 solarpower installations this year, according to CDA estimates. In a project conceived by CDA, the National Association of Plumbing, Heating and Cooling Contractors will train more than 50,000 apprentice plumbers - by having them install copper solar panels on the roofs of their training schools.
No. 42 - 1980
Reliable Energy Production
As America's growing need for energy prompts calls for bigger power plants, engineers are specifying copper alloy condenser tubes in their cooling systems to handle the higher temperatures and greater water velocities they must accommodate. The use of 90/10 and 70/30 copper-nickel alloys offers increased reliability and higher performance. Light-wall copper alloy tube not only provides an economic advantage, it also has distinct advantages of high heat transfer and anticorrosion properties.
No. 43 - 1980
Improved Fuel Efficiency
In a continuing effort to reduce vehicle weight, and thereby realize greater production efficiency and consumer fuel savings, manufacturers show renewed interest in highly capable, lighterweight copper radiators. One promising advance is a new soldering process that is lighter, stronger, has higher conductivity, and costs less than current lead-tin solders.
Nos. 44 and 45 - 1980 and 1981
The third in a series of copper showcase homes opens. Extensive use of energy- saving features throughout the home includes high-efficiency window glazing and increased insulation to supplement built-in solar-energy collectors. The Sun/Tronic "idea home" gets 45 percent of its space and water heating energy from the sun, while photovoltaic cells provide 5 percent of its electrical power. A novel heat exchanger reclaims waste heat from the heat pump to also heat domestic water.
No. 46 - 1981
Long-Lasting Roof Shingles
A long-time producer of aluminum roof shingles begins offering easy-to-install copper shingles, citing copper's extremely long life and high aesthetic appeal. The manufacturer, Zappone, notes that the 99% pure copper materials are more expensive to purchase and install at $3.80 to $5 per square foot, but says their higher cost is balanced by their superior performance benefits.
No. 47 - 1981
Sparkly Restaurant Decor
Embossed copper panels, a popular material for covering interior ceilings and walls since before the turn of the century, are back in vogue as architects increasingly specify the decorative panels for both residential and commercial projects. The famed Maxwell's Plum in San Francisco is cited as just one example of upscale restaurants to feature the panels as a key design element.
No. 48 - 1981
Major Manufacturers Enter Solar Market
The appeal of solar power is expected to increase with the entry of the world's largest carmaker into the expanding solar collector market. Seeking new markets outside its traditional automotive business, the Harrison Radiator Division of General Motors now designs and produces all-copper solar collectors. The units, which heat a home's domestic water, will be sold through solar equipment installers nationwide.
No. 49 - 1982
Classical Exterior for Symphony Hall
A 14,000-sq-ft batten seam copper roof crowns the Louise M. Davies Symphony Hall in San Francisco. An informal survey of architects from New England to California shows an appreciation of copper roofing as an often less-expensive choice for quality and longevity as well as classical beauty, which, according to the Symphony Hall architect, "is so linked with the city's image and prestige, there was no way that roof could be anything but copper."
No. 50 - 1982
Brass Beds Make a Comeback
Proving once more that "what is old can be made new again," brass beds make an amazing comeback among American consumers. The elegant, old-fashioned beds, relegated for many years to back bedrooms, antique shops and grandmothers' attics, now compete sale-for-sale with modern wood-frame beds in showrooms and department stores. American companies that first imported brass beds to fill orders are again making their own.
No. 51 - 1982
Big Oil Rigs Rely on Copper Piping
Encrustation by marine organisms is causing oil producers to replace deteriorating steel piping on their offshore drilling rigs with longlived copper-nickel piping. Plumbing systems on the rigs are used mainly to draw in cooling water, but steel piping develops internal marine growth that impedes flow. Coppernickel is not only naturally impervious to biologic infestation, it is also highly corrosionresistant; experts predict it will find many other uses on the big rigs.
No. 52- 1982
The 'Wright' Shingles
In homage to its iconic namesake, the Frank Lloyd Wright Foundation selects copper shingles for the 3,000 sq. ft. roof of a new home to be built in an exclusive downtown Denver neighborhood. The home's design evokes the architect's "organic" approach to residential architecture, and the copper shingles were chosen to represent the excellence and elegance for which Wright was famous.
No. 53- 1983
Screening Out Undesirables
Biologically resistant copper-nickel screens over underwater intakes protect the nation's water supplies from invasive marine life and debris. The intakes are designed so that water flows too slowly to draw in marine organisms, but these and other unwanted materials eventually find a way in. The copper-nickel prevents organisms from attaching to the screens, and the screens are easy to remove to clear away any material that could block the intakes.
No. 54- 1983
Resilient Automobile Radiators
The advantages of welded brass radiator tube over lock-seam tubing are so great, a new plant is built in Dearborn, Michigan, that can produce welded tubing at 600 feet per minute. Fabrication benefits include higher productivity, reduced solder use and stronger tube-to-header joints. Zinc-based solders with three times the thermal conductivity of lead-tin solders are in development to make the copper and brass radiators lighter, stronger, more efficient and potentially more economical.
No. 55- 1984
Efficient Supermarket Refrigeration
One of the largest U.S. manufacturers of supermarket cooling equipment chooses copper for heat exchange coils and refrigerant tubing on its products. Copper coils increase the efficiency of multiple freezers and refrigerator units, enabling them to use less energy, and require less than half the maintenance of steel-coil units. A copper-coiled unit can serve up to 30 refrigeration circuits compared with a steeltube unit, which may serve only three, according to the manufacturer. Copper-tubed evaporative cooling is also becoming popular for computer-room cooling; some 6,500 pounds of copper tubing is reportedly used to cool equipment at a San Diego computer lab.
No. 56 - 1984
Medical Diagnostic Imaging
Nuclear Magnetic Resonance imaging systems have become powerful medical diagnostic tools, but they require shielding to prevent radiation from escaping and unwanted magnetic waves from entering. Rooms containing the equipment are encased with copper sheeting to protect patients and staff and to prevent stray radio frequency signals from distorting the diagnostic images. NMR systems generate magnetic fields 40,000 times stronger than the Earth's magnetic field
Keeping Shoppers Cool
Major shopping center developers, especially in Sun Belt states, are increasingly choosing copper over steel tubing for vital area-cooling systems. Based on life-cycle costs, copper proves to be less expensive because it lasts longer than steel and less maintenance is required.
No. 58 - 1985
Marine use of copper alloys continues to rise due to their resistance to corrosion and biofouling. Applications include offshore oil drilling rigs, ship hulls and components, and intakes to water systems for municipalities and power plants. Because marine life does not adhere to copper, there is also less weight buildup and correspondingly less strain on structures.
No. 59 - 1985
Energy Saving Bronze Louvers
Operable louvers made of bronze block up to 85 percent of the sun's rays in summer and prevent heat from radiating out in winter. The louvers, which are attached to the outside of windows in a home or business, also block outside noise and can protect the windows from damage during high winds, hurricanes and hailstorms.
No. 60 - 1985
Shielding Lady Liberty
After standing for nearly a century in New York harbor, the Statue of Liberty is undergoing a complete renovation. Investigators find that despite continual exposure to its harsh saltwater and industrial environment, the copper cladding on the statue shows hardly any erosion. Most of the statue will remain intact, but as part of the restoration its torch and flame are to be replaced with new ones identical to the original design
Also in this Issue:
- Four Decades of Innovation: Issues 1 - 25
- Four Decades of Innovation: Issues 26 - 60
- Four Decades of Innovation: Issues 61 - 99
- Copper Shines on Prime Time
- The History of Copper
- The Future of Copper