Loading...
Copper Alloys Search - Basic
Results
C93200
Cast
BRONZES
Copper-Tin-Lead Alloys (High-Leaded Tin Bronzes)
true
false
https://api.copper.org/alloys.xhtml/C93200
Elements | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Cu(1,2) | Pb | Sn | Zn | Fe | P(3) | Ni(4) | Al | S | Sb | Si | |
(1) Cu + Sum of Named Elements 99.0% min. (2) In determining Cu min., Cu may be calculated as Cu + Ni. (3) For continuous castings P shall be 1.5% max. (4) Ni value includes Co. |
|||||||||||
Min (%) | 81.0 | 6.0 | 6.3 | 1.0 | |||||||
Max (%) | 85.0 | 8.0 | 7.5 | 4.0 | 0.20 | 0.15 | 1.0 | 0.005 | 0.08 | 0.35 | 0.005 |
Form | Temper | Temper Code | Tensile Strength (ksi) |
YS-0.5% Ext (ksi) |
Elongation (%) |
Brinell Hardness, 500 kg load | Izod (ft-lbs) |
Compressive Strength .1 in. set/in. (ksi) |
Fatigue Strength** (ksi) |
Proportional Limit (ksi) |
---|---|---|---|---|---|---|---|---|---|---|
* Measured at room temperature, 68°F (20°C). ** Fatigue Strength: 100 x 106 cycles, unless indicated as [N] x 106. | ||||||||||
As Centrifugal Cast | As Centrifugal Cast | M02 |
30 Min for Standard |
14 Min for Standard |
15 Min for Standard |
|||||
As Continuous Cast | As Continuous Cast | M07 |
35 Min for Standard 35 Min for Standard |
20 Min for Standard |
10 Min for Standard 10 Min for Standard |
|||||
As Sand Cast | As Sand Cast | M01 |
30 Min for Standard 30 Min for Standard 35 Typ |
14 Min for Standard 18 Typ |
15 Min for Standard 15 Min for Standard 20 Typ |
65 Typ |
6 Typ | 46 Typ | 16 Typ | 8.5 Typ |
Melting Point - Liquidus°F | 1790 |
---|---|
Melting Point - Solidus°F | 1570 |
Densitylb/cu in. at 68°F | 0.322 |
Specific Gravity | 8.91 |
Electrical Conductivity% IACS at 68°F | 12 |
Thermal ConductivityBtu/ sq ft/ ft hr/ °F at 68°F | 33.6 |
Coefficient of Thermal Expansion 68-21210 to -6 power per °F (68 – 212°F) | 10 |
Specific Heat CapacityBtu/ lb /°F at 68°F | 0.09 |
Modulus of Elasticity in Tensionksi | 14500 |
Casting Attribute | Level |
---|---|
Casting Yield | High |
Drossing | Low |
Effect of Section Size | Medium |
Fluidity | Medium |
Gassing | Medium |
Patternmakers Shrinkage inches per inch | 7/32 |
Shrinkage in Solidification | Low |
Technique | Suitability |
---|---|
Soldering | Excellent |
Brazing | Good |
Oxyacetylene Welding | Not Recommended |
Gas Shielded Arc Welding | Not Recommended |
Coated Metal Arc Welding | Not Recommended |
Machinability Rating | 70 |
Common Fabrication Processes
No fabrication process properties for this alloy
Treatment | Value* | Time** | ||
---|---|---|---|---|
* Temperature is measured in Fahrenheit. ** Time is measured in minutes. | ||||
Stress Relief | 500 | |||
Solution Treatment | 0 |
Product Category | Product | Reason Category | Reason |
---|---|---|---|
Automotive | Automotive Fittings | Corrosion Resistance | Corrosion Resistance |
Automotive Fittings | Corrosion Resistance | Corrosion Resistance to Numerous Environments | |
Automotive Fittings | Machining Properties | Machinability, Good | |
Automotive Fittings | Mechanical Properties | Relatively Low Strength | |
Fasteners | Washers | Corrosion Resistance | Corrosion Resistance |
Washers | Corrosion Resistance | Corrosion Resistance to Numerous Environments | |
Washers | Machining Properties | Machinability, Good | |
Washers | Mechanical Properties | Relatively Low Strength | |
Industrial | Bearings | Corrosion Resistance | Corrosion Resistance |
Bearings | Corrosion Resistance | Corrosion Resistance to Numerous Environments | |
Bearings | Friction & Wear Properties | Anti-Seizing Properties | |
Bearings | Friction & Wear Properties | Low Coefficient of Friction | |
Bearings | Friction & Wear Properties | Wear Resistance | |
Bearings | Machining Properties | Machinability, Good | |
Bearings | Mechanical Properties | Relatively Low Strength | |
Bearings for Cranes | Corrosion Resistance | Corrosion Resistance | |
Bearings for Cranes | Corrosion Resistance | Corrosion Resistance to Numerous Environments | |
Bearings for Cranes | Friction & Wear Properties | Anti-Seizing Properties | |
Bearings for Cranes | Friction & Wear Properties | Low Coefficient of Friction | |
Bearings for Cranes | Friction & Wear Properties | Wear Resistance | |
Bearings for Cranes | Machining Properties | Machinability, Good | |
Bearings for Cranes | Mechanical Properties | Relatively Low Strength | |
Bushings | Corrosion Resistance | Corrosion Resistance | |
Bushings | Corrosion Resistance | Corrosion Resistance to Numerous Environments | |
Bushings | Friction & Wear Properties | Low Coefficient of Friction | |
Bushings | Friction & Wear Properties | Wear Resistance | |
Bushings | Machining Properties | Machinability, Good | |
Bushings | Mechanical Properties | Relatively Low Strength | |
Diesel Engine Wrist Pin Bushings | Corrosion Resistance | Corrosion Resistance | |
Diesel Engine Wrist Pin Bushings | Corrosion Resistance | Corrosion Resistance to Many Industrial Chemicals | |
Diesel Engine Wrist Pin Bushings | Friction & Wear Properties | Anti-Seizing Properties | |
Diesel Engine Wrist Pin Bushings | Friction & Wear Properties | Low Coefficient of Friction | |
Diesel Engine Wrist Pin Bushings | Friction & Wear Properties | Wear Resistance | |
Diesel Engine Wrist Pin Bushings | Machining Properties | Machinability, Good | |
Diesel Engine Wrist Pin Bushings | Mechanical Properties | Relatively Low Strength | |
Fittings | Corrosion Resistance | Corrosion Resistance | |
Fittings | Corrosion Resistance | Corrosion Resistance to Numerous Environments | |
Fittings | Machining Properties | Machinability, Good | |
Fittings | Mechanical Properties | Relatively Low Strength | |
Forging Press Toggle Lever Bearings | Corrosion Resistance | Corrosion Resistance | |
Forging Press Toggle Lever Bearings | Corrosion Resistance | Corrosion Resistance to Numerous Environments | |
Forging Press Toggle Lever Bearings | Friction & Wear Properties | Anti-Seizing Properties | |
Forging Press Toggle Lever Bearings | Friction & Wear Properties | Low Coefficient of Friction | |
Forging Press Toggle Lever Bearings | Friction & Wear Properties | Wear Resistance | |
Forging Press Toggle Lever Bearings | Machining Properties | Machinability, Good | |
Forging Press Toggle Lever Bearings | Mechanical Properties | Relatively Low Strength | |
Fuel Pump Bushings | Corrosion Resistance | Corrosion Resistance | |
Fuel Pump Bushings | Corrosion Resistance | Corrosion Resistance to Numerous Environments | |
Fuel Pump Bushings | Friction & Wear Properties | Anti-Seizing Properties | |
Fuel Pump Bushings | Friction & Wear Properties | Low Coefficient of Friction | |
Fuel Pump Bushings | Friction & Wear Properties | Wear Resistance | |
Fuel Pump Bushings | Machining Properties | Machinability, Good | |
Fuel Pump Bushings | Mechanical Properties | Relatively Low Strength | |
General Purpose Bushings | Corrosion Resistance | Corrosion Resistance | |
General Purpose Bushings | Corrosion Resistance | Corrosion Resistance to Numerous Environments | |
General Purpose Bushings | Friction & Wear Properties | Anti-Seizing Properties | |
General Purpose Bushings | Friction & Wear Properties | Low Coefficient of Friction | |
General Purpose Bushings | Friction & Wear Properties | Wear Resistance | |
General Purpose Bushings | Machining Properties | Machinability, Good | |
General Purpose Bushings | Mechanical Properties | Relatively Low Strength | |
Hydraulic Press Main Lining | Corrosion Resistance | Corrosion Resistance | |
Hydraulic Press Main Lining | Corrosion Resistance | Corrosion Resistance to Many Industrial Chemicals | |
Hydraulic Press Main Lining | Friction & Wear Properties | Anti-Seizing Properties | |
Hydraulic Press Main Lining | Friction & Wear Properties | Wear Resistance | |
Hydraulic Press Main Lining | Machining Properties | Machinability, Good | |
Hydraulic Press Main Lining | Mechanical Properties | Relatively Low Strength | |
Hydraulic Press Stuffing Box | Corrosion Resistance | Corrosion Resistance | |
Hydraulic Press Stuffing Box | Corrosion Resistance | Corrosion Resistance to Numerous Environments | |
Hydraulic Press Stuffing Box | Machining Properties | Machinability, Good | |
Hydraulic Press Stuffing Box | Mechanical Properties | Relatively Low Strength | |
Hydraulic Press Stuffing Box | Pressure Tight | Pressure Tight | |
Insert Bearings | Corrosion Resistance | Corrosion Resistance | |
Insert Bearings | Corrosion Resistance | Corrosion Resistance to Numerous Environments | |
Insert Bearings | Friction & Wear Properties | Low Coefficient of Friction | |
Insert Bearings | Friction & Wear Properties | Wear Resistance | |
Insert Bearings | Machining Properties | Machinability, Good | |
Insert Bearings | Mechanical Properties | Relatively Low Strength | |
Linkage Bushings for Presses | Corrosion Resistance | Corrosion Resistance | |
Linkage Bushings for Presses | Corrosion Resistance | Corrosion Resistance to Numerous Environments | |
Linkage Bushings for Presses | Friction & Wear Properties | Anti-Seizing Properties | |
Linkage Bushings for Presses | Friction & Wear Properties | Low Coefficient of Friction | |
Linkage Bushings for Presses | Friction & Wear Properties | Wear Resistance | |
Linkage Bushings for Presses | Machining Properties | Machinability, Good | |
Linkage Bushings for Presses | Mechanical Properties | Relatively Low Strength | |
Machine Parts | Conductivity (Thermal) | Thermal Conductivity | |
Machine Parts | Corrosion Resistance | Corrosion Resistance | |
Machine Parts | Corrosion Resistance | Corrosion Resistance to Numerous Environments | |
Machine Parts | Friction & Wear Properties | Anti-Seizing Properties | |
Machine Parts | Friction & Wear Properties | Wear Resistance | |
Machine Parts | Machining Properties | Machinability, Good | |
Machine Parts | Mechanical Properties | Relatively Low Strength | |
Machine Tool Bearings | Corrosion Resistance | Corrosion Resistance | |
Machine Tool Bearings | Corrosion Resistance | Corrosion Resistance to Numerous Environments | |
Machine Tool Bearings | Friction & Wear Properties | Anti-Seizing Properties | |
Machine Tool Bearings | Friction & Wear Properties | Low Coefficient of Friction | |
Machine Tool Bearings | Friction & Wear Properties | Wear Resistance | |
Machine Tool Bearings | Machining Properties | Machinability, Good | |
Machine Tool Bearings | Mechanical Properties | Relatively Low Strength | |
Main Spindle Bearings | Corrosion Resistance | Corrosion Resistance | |
Main Spindle Bearings | Corrosion Resistance | Corrosion Resistance to Numerous Environments | |
Main Spindle Bearings | Friction & Wear Properties | Anti-Seizing Properties | |
Main Spindle Bearings | Friction & Wear Properties | Low Coefficient of Friction | |
Main Spindle Bearings | Friction & Wear Properties | Wear Resistance | |
Main Spindle Bearings | Machining Properties | Machinability, Good | |
Main Spindle Bearings | Mechanical Properties | Relatively Low Strength | |
Pump Fixtures | Corrosion Resistance | Corrosion Resistance | |
Pump Fixtures | Corrosion Resistance | Corrosion Resistance to Numerous Environments | |
Pump Fixtures | Machining Properties | Machinability, Good | |
Pump Fixtures | Mechanical Properties | Relatively Low Strength | |
Pump Impellers | Corrosion Resistance | Corrosion Resistance | |
Pump Impellers | Corrosion Resistance | Corrosion Resistance to Brackish Water | |
Pump Impellers | Corrosion Resistance | Corrosion Resistance to Many Industrial Chemicals | |
Pump Impellers | Corrosion Resistance | Corrosion Resistance to Numerous Environments | |
Pump Impellers | Corrosion Resistance | Corrosion Resistance to Petroleum Products | |
Pump Impellers | Friction & Wear Properties | Wear Resistance | |
Pump Impellers | Machining Properties | Machinability, Good | |
Pump Impellers | Mechanical Properties | Relatively Low Strength | |
Pumps | Corrosion Resistance | Corrosion Resistance | |
Pumps | Corrosion Resistance | Corrosion Resistance to Brackish Water | |
Pumps | Corrosion Resistance | Corrosion Resistance to Many Industrial Chemicals | |
Pumps | Corrosion Resistance | Corrosion Resistance to Numerous Environments | |
Pumps | Friction & Wear Properties | Wear Resistance | |
Pumps | Machining Properties | Machinability, Good | |
Pumps | Mechanical Properties | Relatively Low Strength | |
Pumps | Pressure Tight | Pressure Tight | |
Roll Neck Bearings | Corrosion Resistance | Corrosion Resistance | |
Roll Neck Bearings | Corrosion Resistance | Corrosion Resistance to Numerous Environments | |
Roll Neck Bearings | Friction & Wear Properties | Low Coefficient of Friction | |
Roll Neck Bearings | Friction & Wear Properties | Wear Resistance | |
Roll Neck Bearings | Machining Properties | Machinability, Good | |
Roll Neck Bearings | Mechanical Properties | Relatively Low Strength | |
Rolling Mill Bearings | Corrosion Resistance | Corrosion Resistance | |
Rolling Mill Bearings | Corrosion Resistance | Corrosion Resistance to Numerous Environments | |
Rolling Mill Bearings | Friction & Wear Properties | Low Coefficient of Friction | |
Rolling Mill Bearings | Friction & Wear Properties | Wear Resistance | |
Rolling Mill Bearings | Machining Properties | Machinability, Good | |
Rolling Mill Bearings | Mechanical Properties | Relatively Low Strength | |
Thrust Washers | Corrosion Resistance | Corrosion Resistance | |
Thrust Washers | Corrosion Resistance | Corrosion Resistance to Numerous Environments | |
Thrust Washers | Friction & Wear Properties | Wear Resistance | |
Thrust Washers | Machining Properties | Machinability, Good | |
Thrust Washers | Mechanical Properties | Relatively Low Strength | |
Trunion Bearings | Corrosion Resistance | Corrosion Resistance | |
Trunion Bearings | Corrosion Resistance | Corrosion Resistance to Numerous Environments | |
Trunion Bearings | Friction & Wear Properties | Low Coefficient of Friction | |
Trunion Bearings | Friction & Wear Properties | Wear Resistance | |
Trunion Bearings | Machining Properties | Machinability, Good | |
Trunion Bearings | Mechanical Properties | Relatively Low Strength | |
Water Pump Bushings | Corrosion Resistance | Corrosion Resistance | |
Water Pump Bushings | Corrosion Resistance | Corrosion Resistance to Brackish Water | |
Water Pump Bushings | Corrosion Resistance | Corrosion Resistance to Many Industrial Chemicals | |
Water Pump Bushings | Friction & Wear Properties | Anti-Seizing Properties | |
Water Pump Bushings | Friction & Wear Properties | Low Coefficient of Friction | |
Water Pump Bushings | Friction & Wear Properties | Wear Resistance | |
Water Pump Bushings | Machining Properties | Machinability, Good | |
Water Pump Bushings | Mechanical Properties | Relatively Low Strength |
Form | Specific Sub-Form | Application | System | Standard | Description |
---|---|---|---|---|---|
As Centrifugal Cast | Castings | SAE | J461 | WROUGHT AND CAST COPPER ALLOYS | |
Castings | SAE | J462 | CAST COPPER ALLOYS | ||
Castings | ASTM | B271/B271M | COPPER BASE ALLOY CENTRIFUGAL CASTINGS | ||
As Continuous Cast | Castings | SAE | J462 | CAST COPPER ALLOYS | |
Castings | SAE | J461 | WROUGHT AND CAST COPPER ALLOYS | ||
Castings | ASTM | B505/B505M | COPPER BASE ALLOY CONTINUOUS CASTINGS | ||
As Permanent Mold Cast | Castings | SAE | J462 | CAST COPPER ALLOYS | |
Castings | SAE | J461 | WROUGHT AND CAST COPPER ALLOYS | ||
As Sand Cast | Castings | ASTM | B763/B763M | COPPER ALLOY SAND CASTINGS FOR VALVE APPLICATIONS | |
Castings | SAE | J462 | CAST COPPER ALLOYS | ||
Castings | ASTM | B584 | COPPER ALLOY SAND CASTINGS FOR GENERAL APPLICATIONS | ||
ASTM | B66 | BRONZE CASTINGS IN THE ROUGH FOR LOCOMOTIVE WEARING PARTS | |||
Castings | SAE | J461 | WROUGHT AND CAST COPPER ALLOYS | ||
Ingot | ASTM | B30 | COPPER BASE ALLOYS IN INGOT FORM | ||
Corrosion Properties
No Corrosion Properties Available.
DOWNLOAD Standard Designation for Wrought and Cast Alloys [PDF 775KB, includes all alloys]
PLEASE NOTE: This search is best used with Chrome, FFox 3.6+, Safari 2+, Opera 10+ and IE 9+. To report an issue with this page, please contact us.
DISCLAIMER:
The values listed above represent reasonable approximations suitable for general engineering use. Due to commercial variations in compositions and to manufacturing limitations, they should not be used for specification purposes. See applicable ASTM International specification references.
The values listed above represent reasonable approximations suitable for general engineering use. Due to commercial variations in compositions and to manufacturing limitations, they should not be used for specification purposes. See applicable ASTM International specification references.