Loading...
Copper Alloys Search - Basic
Results
C36200
Leaded Brass
Wrought
BRASSES
Copper-Zinc-Lead Alloys (Leaded Brasses)
false
1992-03-09
false
https://api.copper.org/alloys.xhtml/C36200
Elements | ||||
---|---|---|---|---|
Cu | Pb | Zn | Fe | |
Min (%) | 60.0 | 3.5 | ||
Max (%) | 63.0 | 4.5 | Rem | 0.15 |
Form | Temper | Temper Code | Tensile Strength (ksi) |
YS-0.5% Ext (ksi) |
Elongation (%) |
Rockwell B scale | Rockwell F scale | Shear Strength (ksi) |
Fatigue Strength** (ksi) |
Section Size (in) |
Cold Work (%) |
---|---|---|---|---|---|---|---|---|---|---|---|
* Measured at room temperature, 68°F (20°C). ** Fatigue Strength: 100 x 106 cycles, unless indicated as [N] x 106. | |||||||||||
Flat Products | 1/4 Hard | H01 |
56 Typ |
45 Typ |
20 Typ |
62 Typ |
33 Typ |
0.25 | 11 | ||
Rod | 1/2 Hard | H02 |
68 Typ |
52 Typ |
18 Typ |
80 Typ |
38 Typ |
0.25 | 25 | ||
1/2 Hard | H02 |
55 Typ |
44 Typ |
32 Typ |
75 Typ |
32 Typ |
20 Typ | 2 | 15 | ||
1/2 Hard | H02 |
58 Typ |
45 Typ |
25 Typ |
78 Typ |
34 Typ |
1 | 20 | |||
Soft Anneal | O60 |
49 Typ |
18 Typ |
53 Typ |
68 Typ |
30 Typ |
1 | ||||
Shapes | 1/4 Hard | H01 |
56 Typ |
45 Typ |
20 Typ |
62 Typ |
33 Typ |
0.5 | 11 | ||
As Hot Extruded | M30 |
56 Typ |
45 Typ |
20 Typ |
62 Typ |
33 Typ |
0.5 |
Melting Point - Liquidus°F | 1650 |
---|---|
Melting Point - Solidus°F | 1630 |
Densitylb/cu in. at 68°F | 0.307 |
Specific Gravity | 8.5 |
Electrical Conductivity% IACS at 68°F | 26 |
Thermal ConductivityBtu/ sq ft/ ft hr/ °F at 68°F | 67 |
Coefficient of Thermal Expansion 68-57210 to -6 power per °F (68 – 572°F) | 11.4 |
Specific Heat CapacityBtu/ lb /°F at 68°F | 0.09 |
Modulus of Elasticity in Tensionksi | 14000 |
Modulus of Rigidityksi | 5300 |
Technique | Suitability |
---|---|
Soldering | Excellent |
Brazing | Good |
Oxyacetylene Welding | Not Recommended |
Gas Shielded Arc Welding | Not Recommended |
Coated Metal Arc Welding | Not Recommended |
Spot Weld | Not Recommended |
Seam Weld | Not Recommended |
Butt Weld | Fair |
Capacity for Being Cold Worked | Poor |
Capacity for Being Hot Formed | Fair |
Machinability Rating | 100 |
Common Fabrication Processes
- Machining
- Roll Threading and Knurling
Treatment | Minimum* | Maximum* | ||
---|---|---|---|---|
* Temperature is measured in Fahrenheit. | ||||
Annealing | 800 | 1100 | ||
Hot Working Temperature | 1300 | 1450 |
Product Category | Product | Reason Category | Reason |
---|---|---|---|
Industrial | Automatic Screw Machine Parts | Corrosion Resistance | Corrosion Resistance |
Automatic Screw Machine Parts | Corrosion Resistance | Corrosion Resistance to Fresh Water | |
Automatic Screw Machine Parts | Corrosion Resistance | Corrosion Resistance to Salt Water | |
Automatic Screw Machine Parts | Machining Characteristics | Machinability | |
Automatic Screw Machine Parts | Mechanical Properties | Moderate Strength | |
Gears | Corrosion Resistance | Corrosion Resistance | |
Gears | Corrosion Resistance | Corrosion Resistance to Fresh Water | |
Gears | Corrosion Resistance | Corrosion Resistance to Salt Water | |
Gears | Friction & Wear Properties | Wear Resistance | |
Gears | Machining Characteristics | Machinability | |
Gears | Mechanical Properties | Moderate Strength | |
Pinions | Corrosion Resistance | Corrosion Resistance | |
Pinions | Corrosion Resistance | Corrosion Resistance to Fresh Water | |
Pinions | Corrosion Resistance | Corrosion Resistance to Salt Water | |
Pinions | Friction & Wear Properties | Wear Resistance | |
Pinions | Machining Characteristics | Machinability | |
Pinions | Mechanical Properties | Moderate Strength |
Applicable Specifications
No applicable specifications for this alloy
Corrosion Properties
No Corrosion Properties Available.
DOWNLOAD Standard Designation for Wrought and Cast Alloys [PDF 775KB, includes all alloys]
PLEASE NOTE: This search is best used with Chrome, FFox 3.6+, Safari 2+, Opera 10+ and IE 9+. To report an issue with this page, please contact us.
DISCLAIMER:
The values listed above represent reasonable approximations suitable for general engineering use. Due to commercial variations in compositions and to manufacturing limitations, they should not be used for specification purposes. See applicable ASTM International specification references.
The values listed above represent reasonable approximations suitable for general engineering use. Due to commercial variations in compositions and to manufacturing limitations, they should not be used for specification purposes. See applicable ASTM International specification references.