Table 1 - Copper Tube for Gas Installation - TYPE K

Domestic Water Service and Distribution, Fire Protection, Solar, Fuel/Fuel Oil, Natural Gas, Liquefied Petroleum (LP) Gas, HVAC, Snow Melting.
Commercially Available Lengths (1)
Nominal or Standard SizesDrawn (2)Annealed (2)
STRAIGHT LENGTHS
1/4- inch to 8-inch 20 ft 20 ft
10-inch 18 ft 18 ft
12-inch 12 ft 12 ft
COILS
1/4- inch to 1-inch 60 ft
100 ft
1 1/4-inch and 1 1/2-inch 60 ft
2-inch 40 ft
45 ft
Notes:
(1) Individual manufacturers may have commercially available lengths in addition to those shown on this table.
(2) Drawn (hard) temper tube has higher strength than annealed tube and is supplied in straight lengths only. Annealed (soft) temper tube has a lower strength than drawn tube but is easily bent or formed. Annealed tube is available in straight lengths and continuous coils.
(3) Available as special order only.