Copper DX Geothermal Heat Pump Web Site
Copper Applications in Health & Environment
May 1998
By Dave KaaretThe Copper Development Association is sponsoring the creation of a web site designed to allow homeowners to compare the economics of heating and cooling their homes with copper direct exchange(DX) heat pump systems rather than using conventional heating and cooling systems. The heart of the site will be a cost analysis program into which users will specify details about their existing, or prospective new, homes. Users will receive an estimate on the installation and heating and cooling costs of a copper DX system vs. the costs of using oil, gas, electric or a conventional air-to-air heat pump.
The site will also contain an overview of DX systems: how they work, when they are most likely to be economical, how they are different from air-to-air and traditional geothermal (ground source) heat pumps.
Goals of the Site
The oil, gas, and electric heating and cooling systems used in most homes today unnecessarily waste money and energy and generate large quantities of greenhouse gases. If instead, homes were heated and cooled with energy efficient direct exchange (DX) geothermal heat pumps, homeowners would save money, the United States would save energy, and the world would reduce its greenhouse gas emissions.
The Copper DX Geothermal Heat Pump Site is meant to make homeowners aware of the benefits of DX systems and provide them with a tool to let them calculate the costs savings that they can realize.
History of the Site
The site is an outgrowth of a CDA sponsored research project conducted by Prof. W. Stanley Johnson of the University of Tennessee at Knoxville (an overview of this project can be found in the February 1998 Innovations article CDA Backs DX Geothermal Heat Pump R&D). Users specify where they live, if it is a new home or a retrofit, square feet, number of windows, amount of insulation, if the home air conditioned, etc. and the program calculates the number of BTUs needed to heat and cool the home. It then calculates the cost of installing and using copper DX and other heating and cooling systems and provides the life cycle cost of each type of system based on a user entered discount rate for future energy costs. If the economics of a DX system appear to be favorable the user is directed to a list of DX contractors for follow-up consultations.
A DX copper heatpump system may offer significant saving for you. For further information please contact the following sources.
Note:- It is assumed that Oil and Gas systems use electric air conditioning
- Heating and Cooling Costs (in $)
- Example of Analysis from Beta Copper DX Web Site
Level of Analysis
Because the audience of the site is homeowners, and not DX professionals, the number and type of questions that it is feasible to ask are comparatively limited. For example, the average homeowner cannot be expected to answer questions about soil conditions or the ductwork in a home. Also, if the program asks too many questions users will be overwhelmed and not answer them.
In addition, because the site covers the entire US, it is difficult to provide costs that are accurate over the entire country. The cost of installing and using DX and other heating/cooling systems varies depending on soil conditions, weather, local labor costs, etc. While the system does have some ability to handle these items, the size and diversity of the US limits the accuracy possible in a program of this type.
As a result, the program provides a "first cut" analysis of the cost of using and installing the different systems. The site depends on follow-up analysis being conducted by DX contractors.
Overview of economics of DX vs. Conventional Heating & Cooling Systems- The inside the home cost of installing a DX system is comparable to that of conventional systems, around $2,000 per ton, with a one ton system being able to heat or cool 12,000 BTUs.
- DX systems, unlike oil and gas heating, do not require the addition of a second, electric air conditioning system.
- Air-to-air heat pump systems often require a second heating and cooling system because they cannot handle temperature extremes. DX systems work best in extreme temperatures.
- On the negative side, DX systems require copper tubing to be buried in the homeowner's yard increasing installation costs.
- Once a DX system has been installed it is usually far cheaper to use than conventional systems.
Status of the Site
A fully functional beta version of the site has been completed. DX contractors and Professor Johnson are testing the results of the cost analysis program. Their testing has turned up a number of issues, especially as regards installation costs. Once these issues have been resolved the site will receive a graphical makeover and go online. The site should be up in the fall of 1998.
Contact:
Andrew G. Kireta Jr.
National Program Manager
P.O. Box 940
Franklin, IN 46131
Tel: 317-346-6442
Fax: 866-206-8110
E-mail: akiretajr@cda.copper.org
The Latest News
Copper-based Solar Cells:
Good for the Environment, Good for the Consumer
Copper has long been used in solar heating/hot water systems, where it is commonly used in heat exchangers. Now, it promises to become equally valuable in photovoltaic (PV) systems. These systems produce electricity through the action of sunshine on certain semiconductors, including so-called thin-film materials and the currently most promising material: copper indium gallium diselenide or CIGS.
The Presidential Dollars
Golden Collectibles or the Next Coin of the Realm? The U.S. Mint is betting it’s got it right this time. The Mint placed into circulation the first of its new golden dollar coins featuring, for the initial issue, George Washington.
High Strength Copper Steel for Rail Tank Cars to Bridges
This paper shows that the new Copper Steel has advantages over steel presently used in railroad tank cars. The higher strength leads to weight saving; higher impact fracture toughness mitigates against brittle failure particularly at low temperatures. An update of recently completed bridge using the Cu Steel is also provided.
Helpful Hints
Innovations covers technological changes involving copper.
Articles are archived by subject area (see Topics Archives on the left) and by year of publication (see Yearly Archives on the left). You can also search all of the Copper Development Association's Web site by using Search on top right of every page.
If you have articles covering copper technology that you would like to suggest for inclusion here, please send your suggestions to Editors, CDA Innovations.
