A Copper Alliance Member
- Applications
- Resources
- Find Suppliers of Copper
- Technical Reference Library
- Publications List
- Automotive
- Building Construction: Architecture
- Building Construction: Fire Sprinklers
- Building Construction: Home Builders' Marketing Materials
- Building Construction: Natural Gas
- Building Construction: Plumbing
- Electrical: Energy Efficiency
- Electrical: General
- Electrical: Power Quality
- Electrical: Telecommunications
- Industrial: Bronze Bearings
- Industrial: Cast Products
- Industrial: General
- Industrial: Machined Rod Products
- Industrial: Mold Alloys
- Properties / Standards
- Seawater
- Soldering / Brazing / Welding
- Special Publications
- Statistics / Directories
- Seminars, Workshops & Training
- Market Data
- Standards
- Properties
- Properties of Wrought and Cast Copper Alloys
- Properties of Copper
- Low Temperature Properties of Copper
- Cryogenic Properties of Copper
- Typical Uses of Copper Alloys
- Copper Compounds
- Microstructures of Copper Alloys
- Corrosion Protection & Resistance
- Fabrication Practices
- Powder Metallurgy
- Metallurgy of Copper-Base Alloys
- Questions?
- Consumers
- Education
- Environment
- Publications
- Newsletters
- Publications List
- Automotive
- Building Construction: Architecture
- Building Construction: Fire Sprinklers
- Building Construction: Home Builders' Marketing Materials
- Building Construction: Natural Gas
- Building Construction: Plumbing
- Electrical: Energy Efficiency
- Electrical: General
- Electrical: Power Quality
- Electrical: Telecommunications
- Industrial: Bronze Bearings
- Industrial: Cast Products
- Industrial: General
- Industrial: Machined Rod Products
- Industrial: Mold Alloys
- Properties / Standards
- Seawater
- Soldering / Brazing / Welding
- Special Publications
- Statistics / Directories
- About CDA
Industrial
- Copper Motor Rotor
- Casting Alloys
- Copper Alloy Molds
- Applications
- Benefits
- Comparison of Mold Alloy Properties
- Whirlpool Uses Copper Alloy Mold
- Technical Paper - Cooling Prediction
- Technical Paper - Getting Heat Out of the Mold
- Copper Core With Copper Chill Plate Runs Better Than Water In Steel
- Copper-Alloy Core Solves Warpage
- Copper-Alloy Cores Reduce Cycle Time
- Wear Research To Compare Copper Molds To Steel
- ANTEC Report - Use of Copper Alloys to Reduce Mold Condensation Problems
- ANTEC Report - Impact of Fines Separation
- ANTEC Report - Comparison of Various Hard Coatings
- ANTEC Report - Understanding the Source of Reduced Mechanical Properties
- ANTEC Report - Resistance to Erosive Wear
- ANTEC Report - Undercutting Mold Performance
- ANTEC Report - Minimization of Gate Wear
- Applications
- Bronze Sleeve Bearings
- Selecting Bronze Bearing Materials
- Electronic Connector Design Guide
- Mold Design Guidelines
Comparison of Mold Alloy Properties
| Alloy UNS No. | Description | Nominal Properties | ||
|---|---|---|---|---|
| Thermal Conductivity | Rockwell Hardness | Tensile Strength* (ksi) MPa | ||
| (Btu/ft2/ft/hr/°F) at 68F (W/m ·°K) at 293K | ||||
| STEEL | ||||
| S42000 | Type 420 Stainless Steel | 14.4 | C 27-52 | 125-250 |
| 24.9 | 863-1725 | |||
| T20813 | H-13 Tool Steel | 14.4 | C 38-54 | 206 |
| 24.9 | 1421 | |||
| T51620 | P-20 Tool Steel | 22.0 | C 28-50 | 146 |
| 38.1 | 1007 | |||
| ALUMINUM | ||||
| A96061 | Type 6061 T6 | 96.5 | B 60 | 40 |
| 166.9 | 276 | |||
| A97075 | Type 7075 T6 | 75.0 | B 88 | 67 |
| 129.8 | 462 | |||
| COPPER | ||||
| C62400 | Aluminum Bronze | 36.0 | B 92 | 105 |
| 62.3 | 725 | |||
| C17200 | BeCu - High Hardness | 60.6 | C 41 | 190 |
| 104.8 | 1311 | |||
| Cl 7200 | BeCu - Moderate Hardness | 75.7 | C 30 | 170 |
| 131.0 | 1173 | |||
| C17510 | BeCu - High Conductivity | 135.0 | B 96 | 110 |
| 233.6 | 759 | |||
| C18200/18400 | Cr - Hardened Copper | 187.0 | B 60-80 | 51-70 |
| 325.5 | 352-483 | |||
| C64700 | NiSi - Hardened Copper | 94.0 | B 94 | 105 |
| 162.6 | 725 | |||
| C18000 | NiSiCr - Hardened Copper | 125.0 | B 94 | 100 |
| 216.3 | 690 | |||
Copyright © 2013 Copper Development Association Inc. All Rights Reserved.
